Check the main design dimensions according to the figure: R-07

Icon code	Design size	Tolerance
A	15.90	Minimum value
B	27.60	The maximum value
C	1.75	Minimum value
D	21.50	Reference
E	18.00	Reference
F	1.00	±0.10
G	37.30	The maximum value
H	29.20	±0.30
I	1.50	±0.10
J	2.00	±0.10
W	1.00	Reference

● Detection tool: digital caliper or micrometer.

● Indicate the code for inspection.

● The number of outlet slots is 4 × 2.

● hole A is not roundness ≤ 0.20mm, both sides of the hobbing plane of the parallelism ≤ 0.20mm, no significant warping.

● hole hole anastomosis is not allowed to have a step, feel smooth and unimpeded.

● no residual shape or damage, color is no different normal

● finish up to ▽ 7 or more, but allow for harmless scars and miniatures.

● Metal-free impurities or other debris, containing metal, debris products, must be waste separation.

● no melting marks, no internal pores bright spot. There are stomatal highlights (excluding melting marks) products for foreign goods.

● no flash, burr and excess material. Key parts of the burr ≤ 0.05 mm.

● anti-pressure ≥ 25 kg / square centimeter, no damage.

● feel a strong elasticity, and not brittle.

● hardness, wear resistance are suitable for high-speed heavy-duty rotation.

● Selection of raw materials must meet the requirements of the EU ROHS directive, and has UL yellow card certification and fixed-point supply.

● heat distortion temperature ≥ 120 degrees Celsius, insulation resistance must be ≥ 1000M ohm, flame retardant UL94Vo level / 0.8-3.2mm.

● other structures should meet the transformer manufacturing process as the standard.

Check the main design dimensions as shown: R-07 outside

Icon code	Design size	Tolerance
K	21.80	±
L	27.50	The maximum value
M	1.85	Minimum value
N	23.80	±
O	1.00	±0.10
P	32.50	±
Q	27.00	±0.30
R	1.50	±
S	2.50	±

● Detection tool: digital caliper or micrometer.

● Indicate the code for inspection.

● The number of outlet slots is 5 × 2.

● the hole K is not roundness ≤ 0.20mm, with the inner shell D size with the appropriate fit.

● hole hole anastomosis is not allowed to have a clear step, two pieces of flat after no obvious warping, splicing seam ≤ 0.20mm.

● shape no defect or damage, allowing anastomosis in the absence of defects, color is no different normal

● finish up to ▽ 7 or more, but allow for harmless scars and miniatures.

● Metal-free impurities or other debris, containing metal, debris products, must be waste separation.

● no melting marks, no internal pores bright spot. There are stomatal highlights (excluding melting marks) products for foreign goods.

● no flash, burr and excess material. Key parts of the burr ≤ 0.05 mm.

● anti-pressure ≥ 25 kg / square centimeter, no damage.

● feel a strong elasticity, and not brittle.

● Selection of raw materials must meet the requirements of the EU ROHS directive, and has UL yellow card certification and fixed-point supply.

● heat distortion temperature ≥ 120 degrees Celsius, insulation resistance must be ≥ 1000M ohm, flame retardant UL94Vo level / 0.8-3.2mm.

● other structures should meet the transformer manufacturing process as the standard.